FEATURES:

This machine is suitable for heavy cutting , easy operation, high tenacity, stability and heavy workload, which are good for heavy turning of mold, gear, wheel, shaft, central spindle etc.

Base

Designed for heavy duty cutting: this base is made of high quality Mechanite casting and design for rigid construction increase the loading capacity and processing stability.

Gear box

1) Adopt metric / inch gearbox for inch, metric, DP, MP, threading and multiple threads, all function is reached without any change gear, wide and complete range of threads and operating easily to improve production efficiency.

2) Two T.P.I. per inch is available for inch threading, which provide wider threading range than other similar specification of lathe and more convenient for operating.

Compound rest

Adopt 4-point tightened the rest to ensure the stability of compound rest. Wider tool post and top slide are induction hardened and ground precisely to promise a long life.

Spindle & headstock

12-step speed change, spindle is supported by three points with bearings. Gears and spindle are made of high quality alloy carbon treated, spindle bore 80mm or 105mm, precision ground to acquire much superior hardness and tenacity.

Apron

Enforced oil feeding device, which ensure the slide ways with proper lubricating, effectively keep high accuracy turning, reduce the wearing of slide ways. Provide safety device to prevent the collision which from danger.

Carriage & saddle

The contacting surfaces with bedways are pasted with Turcite-B. The slot surface of dovetail slide way has been ultra-frequency heat treated (induction hardened and ground) to promise a long service life.

Cross slide screw:

Two point support and suitable for heavy duty turning. 

Tailstock

Two steps fixed device for tailstock increase the capacity of heavy duty turning and drilling stability.

Two steps feeding device for easy operation.

MODEL ITEM FHG-660 / FHG-760 / FHG-840
1200 1700 2200 3200 4200
Capacity Swing over bed 660 / 760 / 840 mm
  Swing over cross slide 400 / 500 / 580 mm
  Distance between centers 1170mm 1670mm 2170mm 3170mm 4170mm
Bed Widh of bed 420 mm
  Width of gap                   (spindle end face) 305 mm
  Length of bed 2600mm 3100mm 3600mm 4600mm 5600mm
Headstock Spindle bore dia. Ø80mm / Opt. Ø105mm
  Numbered of Spindle speeds 12 steps
  Range of spindle speeds 23-1300rpm
  Spindle Nose A1-8 / Opt. Spindle Hole Ø105mm A2-8 ;  D1-8, D2-8, A2-11 only for Spindle Hole Ø105mm
Carriage Width of carriage 670mm
  Cross slide travel 400mm
  Top slide travel                   (Compound rest travel) FHG-660: 150mm / FHG-720,760: 240mm
  Tool Shank 25x25 mm
Tailsotck Diameter of quill Ø80 mm
  Travel of quill 200 mm
  Taper of quill M.T. 5
Threads Lead screw dia. & pitch Dia.45mm Pitch 12mm
  Range of metric pitches 0.8-14 (65 Nos)
  Range of inch pitches 2-28 T.P.I (36 Nos)
  Range of dia. pitches 4-56 D.P. (36 Nos)
  Range of module pitches 0.5-7 M.P. (22 Nos)
Feeds Feed road dia. Ø32mm
  Range of longitudinal feeds 0.05 - 0.7  mm/rev
  Range of cross feeds 0.025 - 0.35 mm/rev
Motor Main spindle motor 10HP (7.5kw)  Opt.:15HP (11.25kw)
  Coolant pump motor 1/8 HP (0.1kw)
Measurement N.W./G.W. (approx) (kgs) FHG-660 2900 / 2950 3100 / 3200 3300 / 3450 3750 / 3950 4250 / 4450
  FHG-760 3100 / 3150 3300 / 3400 3500 / 3650 3950 / 4150 4450 / 4650
  FHG-840 3260 /3310 3460 /3560 3660 / 3810 4110 / 4310 4610 / 4810
**We reserve the right to modify and improve our products without notice.              

 

  • Follow rest
  • 4-jaw independent chuck 20”, 25”
  • Face plate with 4-jaw 24”, 26”, 28”, 30”
  • Longitudinal & cross rapid feeding (only for FHG-1200,1700)
  • Halogen light
  • Digital readout
  • Back splash guard
  • Quick change tool post-Standard or European style (instead of tool post)
  • CE Normative
  • Taper turning attachment
  • Grinder
  • Hydraulic copy attachment
  • X,Z-axes auto lubrication system
  • Metric / Inch gear box
  • Coolant device
  • Longitudinal adjustable position feed stop
  • Tailstock two steps device
  • 3-jaw scroll chuck 10”
  • Back plate of chuck
  • Steady rest Ø11-1/2”
  • Center sleeve MT-5
  • Dead center
  • Toolpost screw wrench
  • Level pads
  • Tools & tool & tool box
  • Operation manual
  • Longitudinal & cross rapid feeding (only for FHG-2200,3200,4200 only)

** Actual standard accessories shall be subject to quotation sheet.**